Hyundai Azera: Oil Level Gauge & Pipe Repair procedures

Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Engine Mechanical System / Lubrication System / Oil Level Gauge & Pipe Repair procedures

Removal and Installation

1.

Remove the oil level gauge (A).

Tightening torque:

18.6 ~ 22.6N.m (1.9 ~ 2.3kgf.m, 13.7 ~ 16.6lb-ft)

When installing, apply engine oil to the O-ring and take care the O-ring not to be damaged.

Always use a new O-ring.

2.	Installation is in the reverse order of removal.

Oil Level Gauge & Pipe Components and Components Location

Components 1. Oil level gauge2. Oil level gauge pipe3. O-ring ...

Intake And Exhaust System

...

See also:

Torque Converter Control Solenoid Valve (T/CON_VFS) Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the ...

Door lock/unlock features
Impact sensing door unlock system All doors will automatically unlock when an impact causes the air bags to deploy. Shift lever door lock/unlock system All doors will automatically lock when the ...

Front Bumper Cover Repair procedures
Replacement • Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface. • Take care not to bend or scratch the trim and pan ...

Categories

Hyundai Azera Manuals

© 2011-2024 Copyright www.hgmanual.com