Rail Pressure Sensor (RPS) Repair procedures
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the RPS at idle and various engine speed.
ConditionOutput Voltage (V)Idle Approx. 1.21, ...
Specifications
Specification
Ignition System
ItemsSpecificationIgnition coilPrimary resistance0.75? ± 15 %Secondary resistance5.9k? ± 15 %Spark plugsTypeSILZKR7B11Gap1.0 ~ 1.1mm (0.0394 ~ 0.0433in.)
Starting ...
Fuel Pressure Control Valve (FPCV) Repair procedures
Inspection
1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Disconnect the fuel pressure regulator valve connector.
3.
Measure resistance between the fuel ...