Hyundai Azera: SS-B Solenoid Valve(ON/OFF) Schematic Diagrams

SS-B Solenoid Valve(ON/OFF) Specifications

Specifications ON/OFF Solenoid Valve(SS-A, SS-B) ? Control type : Normal low type Control pressure [kpa (kgf/cm?, psi)]490.33(5.0, 71.12) Internal resistance(?)10~11 ...

SS-B Solenoid Valve(ON/OFF) Repair procedures

Inspection 1. Turn ignition switch OFF. 2. Disconnect the solenoid valver connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the ...

See also:

Specifications
Specification Ignition System ItemsSpecificationIgnition coilPrimary resistance0.75? ± 15 %Secondary resistance5.9k? ± 15 %Spark plugsTypeSILZKR7B11Gap1.0 ~ 1.1mm (0.0394 ~ 0.0433in.) Starting ...

Tire sidewall labeling
This information identifies and describes the fundamental characteristics of the tire and also provides the tire identification number (TIN) for safety standard certification. The TIN can be used ...

Front Pillar Trim Repair procedures
Replacement     • Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface. • Take care not to bend or scratch the trim and pan ...