Specifications |
Control pressure [kpa (kgf/cm?, psi)] | 490.33(5.0, 71.12) |
Internal resistance(?) | 10~11 |
Input Speed Sensor Repair procedures
Inspection
1.
Check signal waveform of Input & output speed sensor using the GDS.
Specification: Refer to "Signal Wave Form" section.
Removal
1.
Remove the battery and the battery ...
Center Pillar Trim Repair procedures
Replacement
•
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
•
Take care not to bend or scratch the trim and pan ...
Front Door Outside Handle Components and Components Location
Component Location
1. Front door outside handle
...