Replacement |
1. |
Remove the cap (B) and remove the nuts, then remove the wiper arm (A).
|
2. |
Disconnect the nozzle hose (B). |
3. |
Detach the clips, then remove the cowl top cover (A). |
4. |
Installation is the reverse of removal.
|
ESC Control Module Components and Components Location
Components
1. Front - left tube2. Rear - right tube3. Rear - left tube4. Front - right tube5. MC26. MC17. ESC control module (HECU)8. Damper9. Bracket
...
Engine Coolant Temperature Sensor (ECTS) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the ECTS connector.
3.
Remove the ECTS (Refer to "Removal").
4.
After immersing the thermistor of the sensor into engine coola ...
Anchor Pretensioner (APT) Description and Operation
Description
Front seat belt anchor pretensioner operates as well as belt
pretensioner at the same time If it gets into its deploy condition after
a collision. It is located at near anchor on fr ...