Hyundai Azera: Specifications
| Specifications |
| Fuel Delivery System |
| Items | Specification | |
| Fuel Tank | Capacity | 70 lit. (18.5 U.S.gal., 74.0 U.S.qt., 61.6 Imp.qt.) |
| Fuel Filter | Type | Paper type |
| Fuel Pressure | Low Pressure Fuel Line | 480 ~ 520 kPa (4.9 ~ 5.3 kgf/cm?, 69.6 ~ 75.4 psi) |
| High Pressure Fuel Line | 2.0 ~ 14.7 MPa (20.0 ~ 150.0 kgf/cm?, 284.5 ~ 2133.5 psi) | |
| Fuel Pump | Type | Electrical, in-tank type |
| Driven by | Electric motor | |
| High Pressure Fuel Pump | Type | Mechanical type |
| Driven by | Camshaft | |
| Sensors |
Barometric Pressure Sensor (BPS)
? Type: Piezo-resistive pressure sensor
? Specification
| Pressure [kPa (kgf/cm?, psi)] | Output Voltage (V) |
| 10.0 (0.01, 0.15) | 0.50 |
| 55.0 (0.56, 7.98) | 2.21 |
| 100.0 (1.01, 14.5) | 3.93 |
| 115.0 (1.17, 16.9) | 4.50 |
Intake Air Temperature Sensor (IATS)
? Type: Thermistor type
? Specification
| Temperature | Resistance (k?) | |
| °C | °F | |
| -40 | -40 | 40.93 ~ 48.35 |
| -20 | -4 | 13.89 ~ 16.03 |
| 0 | 32 | 5.38 ~ 6.09 |
| 10 | 50 | 3.48 ~ 3.90 |
| 20 | 68 | 2.31 ~ 2.57 |
| 40 | 104 | 1.08 ~ 1.21 |
| 60 | 140 | 0.54 ~ 0.66 |
| 80 | 176 | 0.29 ~ 0.34 |
Manifold Absolute Pressure Sensor (MAPS)
? Type: Piezo-resistive pressure sensor
? Specification
| Pressure [kPa (kgf/cm?, psi)] | Output Voltage (V) |
| 20.0 (0.20, 2.90) | 0.79 |
| 46.66 (0.47, 6.77) | 1.84 |
| 101.32 (1.03, 14.7) | 4.0 |
Engine Coolant Temperature Sensor (ECTS)
? Type: Thermistor type
? Specification
| Temperature | Resistance (k?) | |
| °C | °F | |
| -40 | -40 | 48.14 |
| -20 | -4 | 14.13 ~ 16.83 |
| 0 | 32 | 5.79 |
| 20 | 68 | 2.31 ~ 2.59 |
| 40 | 104 | 1.15 |
| 60 | 140 | 0.59 |
| 80 | 176 | 0.32 |
Throttle Position Sensor (TPS) [integrated into ETC module]
? Type: Hall IC Non-contact sensor type
? Specification
| Throttle angle(°) | Output Voltage (V) | |
| TPS1 | TPS2 | |
| 0 | 0.5 | 4.5 |
| 10 | 0.96 | 4.05 |
| 20 | 1.41 | 3.59 |
| 30 | 1.87 | 3.14 |
| 40 | 2.32 | 2.68 |
| 50 | 2.78 | 2.23 |
| 60 | 3.23 | 1.77 |
| 70 | 3.69 | 1.32 |
| 80 | 4.14 | 0.86 |
| 90 | 4.6 | 0.41 |
| 98 | 4.65 | 0.35 |
| C.T (0) | 0.5 | 4.5 |
| W.O.T (86) | 4.41 | 0.59 |
Crankshaft Position Sensor (CKPS)
? Type: Magnetic field sensitive sensor
? Specification
| Item | Specification |
| Coil Resistance (?) | 774 ~ 946 [20°C(68°F)] |
| Air Gap (mm) | 0.5 ~ 1.5 |
Camshaft Position Sensor (CMPS)
? Type: Hall effect type
? Specification
| Item | Specification |
| Output Voltage (V) | High: 5.0V |
| Low: 0.7V | |
| Air Gap (mm) | 0.5 ~ 1.5 |
Knock Sensor (KS)
? Type: Piezo-electricity type
? Specification
| Item | Specification |
| Capacitance (pF) | 950 ~ 1,350 |
| Resistance (M?) | 4.87 |
Heated Oxygen Sensor (HO2S) [Bank 1/Sensor 1, Bank 2/Sensor 1]
? Type: Zirconia (ZrO2) [Binary] Type
? Specification
| A/F Ratio (?) | Output Voltage(V) |
| RICH | 0.6 ~ 1.0 |
| LEAN | 0 ~ 0.4 |
| Item | Specification |
| Heater Resistance (?) | about 9.0 [20°C(68°F)] |
Heated Oxygen Sensor (HO2S) [Bank 1/Sensor 2, Bank 2/Sensor 2]
? Type: Zirconia (ZrO2) [Binary] Type
? Specification
| A/F Ratio (?) | Output Voltage(V) |
| RICH | Min. 0.8 |
| LEAN | Max. 0.1 |
| Item | Specification |
| Heater Resistance (?) | 3.3 ~ 4.1[20°C(68°F)] |
Rail Pressure Sensor (RPS)
? Type: Piezo-electricity type
? Specification
CVVT Oil Temperature Sensor (OTS)
? Type: Thermistor type
? Specification
| Temperature | Resistance (k?) | |
| °C | °F | |
| -40 | -40 | 52.15 |
| -20 | -4 | 16.52 |
| 0 | 32 | 6.0 |
| 20 | 68 | 2.45 |
| 40 | 104 | 1.11 |
| 60 | 140 | 0.54 |
| 80 | 176 | 0.29 |
Accelerator Position Sensor (APS)
? Type: Variable resistor type
? Specification
| Accelerator Position | Output Voltage (V) | |
| APS1 | APS2 | |
| C.T | 0.7 ~ 0.8 | 0.29 ~ 0.46 |
| W.O.T | 3.85 ~ 4.35 | 1.93 ~ 2.18 |
Fuel Tank Pressure Sensor (FTPS)
? Type: Piezo - Resistivity type
? Specification
| Pressure [kPa (kgf/cm?, psi)] | Output Voltage (V) |
| -6.67 (-0.06, -0.97) | 0.5 |
| 0 | 2.5 |
| +6.67 (0.068, 0.97) | 4.5 |
| Actuators |
Injector
? Specification
| Item | Specification |
| Coil Resistance (?) | 0.98 ~ 1.14 [20°C(68°F)] |
ETC Motor [integrated into ETC Module]
? Specification
| Item | Specification |
| Coil Resistance (?) | 0.3 ~ 100 [20°C(68°F)] |
Purge Control Solenoid Valve (PCSV)
? Specification
| Item | Specification |
| Coil Resistance (?) | 22.0 ~ 26.0 [20°C(68°F)] |
CVVT Oil Control Valve (OCV)
? Specification
| Item | Specification |
| Coil Resistance (?) | 9.4 ~10.4 [20°C(68°F)] |
Variable Intake Solenoid (VIS) Valve
? Specification
| Item | Specification |
| Coil Resistance (?) | 30.0 ~ 35.0 [20°C(68°F)] |
Ignition Coil
? Type: Stick type
? Specification
| Item | Specification |
| Primary Coil Resistance (?) | 0.62 ± 10%[20°C(68°F)] |
| Secondary Coil Resistance (k?) | 7.0 ± 15%[20°C(68°F)] |
Fuel Pressure Control Valve (FPCV)
? Specification
| Item | Specification |
| Coil Resistance (?) | 1.04 ~ 1.27 [23°C(73.4°F)] |
Canister Close Valve (CCV)
? Specification
| Item | Specification |
| Coil Resistance (?) | 19.8 ~ 21.8 [20°C(68°F)] |
| Service Standard |
| Item | Specification | ||
| Ignition Timing (°) | BTDC 5° ± 10° | ||
| Idle Speed (rpm) | A/C OFF | Neutral, N, P-range | 650 ± 100 |
| D-range | 580 ± 100 | ||
| A/C ON | Neutral, N, P-range | 650 ± 100 | |
| D-range | 600 ± 100 | ||
| Tightening Torques |
| Engine Control System |
| Item | kgf.m | N.m | lb-ft |
| ECM installation bolt | 1.0 ~ 1.2 | 9.8 ~ 11.8 | 7.2 ~ 8.7 |
| ECM installation screw | 1.0 ~ 1.2 | 9.8 ~ 11.8 | 7.2 ~ 8.7 |
| ECM bracket installation bolt / nut | 1.0 ~ 1.2 | 9.8 ~ 11.8 | 7.2 ~ 8.7 |
| IDB installation bolt | 1.0 ~ 1.2 | 9.8 ~ 11.8 | 7.2 ~ 8.7 |
| IDB bracket installation bolt | 1.9 ~ 2.4 | 18.6 ~ 23.5 | 13.7 ~ 17.4 |
| Barometric pressure sensor installation bolt | 0.4 ~ 0.6 | 3.9 ~ 5.9 | 2.9 ~ 4.3 |
| Engine coolant temperature sensor installation | 3.0 ~ 4.0 | 29.4 ~ 39.2 | 21.7 ~ 28.9 |
| Manifold absolute pressure sensor installation bolt | 1.0 ~ 1.2 | 9.8 ~ 11.8 | 7.2 ~ 8.7 |
| Intake air temperature sensor installation bolt | 1.0 ~ 1.2 | 9.8 ~ 11.8 | 7.2 ~ 8.7 |
| Crankshaft position sensor installation bolt | 0.7 ~ 1.0 | 6.9 ~ 9.8 | 5.1 ~ 7.2 |
| Camshaft position sensor (Bank 1/Intake) installation bolt | 0.7 ~ 1.0 | 6.9 ~ 9.8 | 5.1 ~ 7.2 |
| Camshaft position sensor (Bank 1/Exhaust) installation bolt | 0.7 ~ 1.0 | 6.9 ~ 9.8 | 5.1 ~ 7.2 |
| Camshaft position sensor (Bank 2/Intake) installation bolt | 0.7 ~ 1.0 | 6.9 ~ 9.8 | 5.1 ~ 7.2 |
| Camshaft position sensor (Bank 2/Exhaust) installation bolt | 0.7 ~ 1.0 | 6.9 ~ 9.8 | 5.1 ~ 7.2 |
| Knock sensor #1 (Bank 1) installation bolt | 1.6 ~ 2.4 | 15.7 ~ 23.5 | 11.6 ~ 17.4 |
| Knock sensor #2 (Bank 2) installation bolt | 1.6 ~ 2.4 | 15.7 ~ 23.5 | 11.6 ~ 17.4 |
| Heated oxygen sensor (Bank 1 / sensor 1) installation | 3.6 ~ 4.6 | 35.3 ~ 45.1 | 26.0 ~ 33.3 |
| Heated oxygen sensor (Bank 1 / sensor 2) installation | 3.6 ~ 4.6 | 35.3 ~ 45.1 | 26.0 ~ 33.3 |
| Heated oxygen sensor (Bank 2 / sensor 1) installation | 3.6 ~ 4.6 | 35.3 ~ 45.1 | 26.0 ~ 33.3 |
| Heated oxygen sensor (Bank 2 / sensor 2) installation | 3.6 ~ 4.6 | 35.3 ~ 45.1 | 26.0 ~ 33.3 |
| Rail pressure sensor installation | 3.0 ~ 3.5 | 29.4 ~ 34.3 | 21.7 ~ 25.3 |
| CVVT oil temperature sensor installation | 3.5 ~ 4.5 | 34.4 ~ 41.1 | 25.3 ~ 32.5 |
| Electronic throttle body installation bolt | 1.0 ~ 1.2 | 9.8 ~ 11.8 | 7.2 ~ 8.7 |
| Purge control solenoid valve bracket installation bolt | 1.0 ~ 1.2 | 9.8 ~ 11.8 | 7.2 ~ 8.7 |
| CVVT oil control valve (Bank 1 / Intake) installation bolt | 1.0 ~ 1.2 | 9.8 ~ 11.8 | 7.2 ~ 8.7 |
| CVVT oil control valve (Bank 1 / Exhaust) installation bolt | 1.0 ~ 1.2 | 9.8 ~ 11.8 | 7.2 ~ 8.7 |
| CVVT oil control valve (Bank 2 / Intake) installation bolt | 1.0 ~ 1.2 | 9.8 ~ 11.8 | 7.2 ~ 8.7 |
| CVVT oil control valve (Bank 2 / Exhaust) installation bolt | 1.0 ~ 1.2 | 9.8 ~ 11.8 | 7.2 ~ 8.7 |
| Variable intake solenoid valve installation nut | 0.6 ~ 0.9 | 5.9 ~ 8.8 | 4.3 ~ 6.5 |
| Ignition coil installation bolt | 1.0 ~ 1.2 | 9.8 ~ 11.8 | 7.2 ~ 8.7 |
| Canister close valve installation bolt | 0.4 ~ 0.6 | 3.9 ~ 5.9 | 2.9 ~ 4.3 |
| Fuel Delivery System |
| Item | kgf.m | N.m | lb-ft |
| Fuel tank band installation nut | 4.0 ~ 5.5 | 39.2 ~ 54.0 | 28.9 ~ 39.8 |
| Fuel pump plate cover installation bolt | 0.2 ~ 0.3 | 2.0 ~ 2.9 | 1.4 ~ 2.2 |
| Filler-neck assembly installation screw | 0.8 ~ 1.2 | 7.8 ~ 11.8 | 5.8 ~ 8.7 |
| Filler-neck assembly bracket installation bolt | 0.8 ~ 1.2 | 7.8 ~ 11.8 | 5.8 ~ 8.7 |
| Accelerator pedal module installation bolt | 0.9 ~ 1.4 | 8.8 ~ 13.7 | 6.5 ~ 10.1 |
| Accelerator pedal module installation nut | 1.3 ~ 1.6 | 12.7 ~ 15.7 | 9.4 ~ 11.6 |
| Delivery pipe installation bolt | 1.9 ~ 2.4 | 18.6 ~ 23.5 | 13.7 ~ 17.4 |
| High pressure fuel pipe function block installation bolt | 0.8 ~ 1.2 | 7.8 ~ 11.8 | 5.8 ~ 8.7 |
| High pressure fuel pump installation bolt | 1.3 ~ 1.5 | 12.8 ~ 14.7 | 9.4 ~ 10.9 |
| High pressure fuel pipe installation nut | 3.0 ~ 3.6 | 29.4 ~ 35.3 | 21.7 ~ 26.0 |
| High pressure fuel pipe bracket installation bolt | 0.8 ~ 1.2 | 7.8 ~ 11.8 | 5.8 ~ 8.7 |
Special Service Tools
Special Service Tools
ItemIllustrationApplicationFuel Pressure Gauge(09353-24100)Measuring the fuel line pressureFuel Pressure Gauge Adapter(09353-02100)Connection between the high pressure fuel ...
See also:
Outside Rear View Mirror Repair procedures
Replacement
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related parts, to
prevent damage.
•
Put ...
Battery replacement
A smart key battery should last for several years, but if the smart key is not
working properly, try replacing the battery with a new one. If you are unsure how
to use your smart key or replace the ...
Seat Belt Pretensioner (BPT) Repair procedures
Removal
1.
Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
2.
Left side - Remove the seat belt lower anchor cover (A).
After loosening the ...
Categories
Hyundai Azera Manuals
© 2011-2024 Copyright www.hgmanual.com