Hyundai Azera: Specifications
| Specifications |
Purge Control Solenoid Valve (PCSV)
? Specification
| Item | Specification |
| Coil Resistance (?) | 22.0 ~ 26.0 [20°C(68°F)] |
Fuel Tank Pressure Sensor (FTPS)
? Type: Piezo-Resistive Pressure Sensor
? Specification
| Pressure (kPa) | Output Voltage (V) |
| -6.67 | 0.5 |
| 0 | 2.5 |
| +6.67 | 4.5 |
Canister Close Valve (CCV)
? Specification
| Item | Specification |
| Coil Resistance (?) | 19.8 ~ 21.8 [20°C(68°F)] |
| Tightening Torques |
| Item | kgf.m | N.m | lb-ft |
| Positive Crankcase Ventilation (PCV) Valve installation | 0.8 ~ 1.2 | 7.8 ~ 11.8 | 5.8 ~ 8.7 |
| Canister installation bolt | 0.4 ~ 0.6 | 3.9 ~ 5.9 | 2.9 ~ 4.3 |
| Canister protector installation bolt | 0.9 ~ 1.4 | 8.8 ~ 13.7 | 6.5 ~ 10.1 |
Description and Operation
Description
Emissions Control System consists of three major systems.
•
Crankcase Emission Control System prevents blow-by gas from
releasing into the atmosphere. This system recycles gas ba ...
Troubleshooting
Troubleshooting
SymptomSuspect areaEngine will not start or stuggle to startVapor hose damaged or disconnectedEngine stuggle to startMalfunction of the Purge Control Solenoid ValveRough idle or e ...
See also:
Power Door Lock Actuators Repair procedures
Inspection
Front Door Lock Actuator Inspection
1.
Remove the front door trim.
(Refer to Body - "Front Door Trim")
2.
Remove the front door module.
3.
Disconnect the connector (7P) from t ...
Front Seat Shield Outer Cover Repair procedures
Replacement
•
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
•
Take care not to bend or scratch the trim and pan ...
Rear Stabilizer Bar Repair procedures
Replacement
1.
Remove the rear wheel & tire (A).
Tightening torque:
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
•
Be careful not to damage to the hub bo ...
Categories
Hyundai Azera Manuals
© 2011-2025 Copyright www.hgmanual.com