Hyundai Azera: Reservoir Tank Components and Components Location

Radiator Repair procedures

Removal and Installation 1. Remove the radiator upper hose and lower hose. (Refer to Cooling System - "Radiator Hose") 2. Remove the cooling fan assembly. (Refer to Cooling System - "Cooli ...

Reservoir Tank Repair procedures

Removal and Installation 1. Disconnect the over flow hose (A), and then remove the resorvior tank (B). Tightening torque: 3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft) 2. Installation ...

See also:

SS-A Solenoid Valve(ON/OFF) Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the ...

Hood Insulator Pad Repair procedures
Replacement 1. Using a clip remover, detach the clips, and remove the hood insulator pad (A).     • Be careful not to scratch the hood panel. 2. Installation is the ...

Rear Door Latch Components and Components Location
Component Location 1. Rear door latch ...