This system can only sense objects within the range and location of the sensors; it can not detect objects in other areas where sensors are not installed. Also, small or slim objects, such as poles or objects located between sensors may not be detected by the sensors.
Always visually check behind the vehicle when backing up. Be sure to inform any drivers of the vehicle that may be unfamiliar with the system regarding the systems capabilities and limitations.
WARNING - Objects
Pay close attention when the vehicle is driven close to objects on the road, particularly pedestrians, and especially children. Be aware that some objects may not be detected by the sensors, due to the object’s distance, size or material, all of which can limit the effectiveness of the sensor.To avoid collisions with children, pedistrians, objects, and vehicles, always perform a visual inspection to make sure the vehicle is clear of all obstructions before moving the vehicle in any direction. Otherwise serious injuries could occur.
Repair procedures
Adjustment
Glass Adjustment
•
Check the glass run channel for damage or deterioration, and replace them if necessary.
1.
Remove the rear door trim.
(Refer to Rear ...
A/V external amplifier Components and Components Location
Components
Pin No.Pin nameFunctionPower [W]A1Battery +power input10AA2Battery +power input10AA3Battery +power input10AA4-no connect?A5CAN +CAN +20mAA6CAN -CAN -20mAA7ACCACC/IGN input(on/off)10mAA ...
Front Rear Parking Assist System Switch Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel in the driver side.
(Refer to Body - "Crash Pad Lower Panel")
3.
Disconnect the connector and ...