Replacement |
1. |
Remove the rear door trim.
(Refer to Rear Door - "Rear Door Trim") |
2. |
After loosening the mounting screws, then remove the rear door curtain (A). |
3. |
Installation is the reverse of removal.
|
Glass antenna
When the radio power switch is turned on while the ignition switch is in either
the “ON” or “ACC” position, your vehicle will receive both AM and FM broadcast signals
through the antenna in the rear ...
Input Speed Sensor Troubleshooting
Signal Waveform
Fig 1) Input/Output speed sensor at low speed
Fig 2) Input/Output speed sensor at high speed ...
Seat Heater Switch Repair procedures
Inspection
Front Seat Heater Switch
1.
Disconnect the negative (-) battery terminal.
2.
Remove the floor console upper cover.
(Refer to Body - "Floor Console Assembly")
3.
Remove the sea ...