Specification |
Item | Specification |
Coil Resistance (?) | 22.0 ~ 26.0 [20°C(68°F)] |
Inhibitor Switch Schematic Diagrams
Circuit Diagram
...
Drive Belt Repair procedures
Removal and Installation
1.
Disconnect the battery negative terminal.
2.
To release the tension, turn the drive belt tensioner counterclockwise then remove the drive belt (A).
3.
Installa ...
Repair procedures
Inspection
Check it by the procedure below to see if the function of the ECM is normal.
1.
Turn the ignition key to the "ON" position.
2.
Cover the front sensor to stop functioning.
3.
Sh ...