Hyundai Equus Manuals

Hyundai Azera: Heated Steering wheel Repair procedures - Steering wheel - Steering System - Hyundai Azera 2011-2025 Service ManualHyundai Azera: Heated Steering wheel Repair procedures

Fifth generation HG (2011–2025) / Hyundai Azera 2011-2025 Service Manual / Steering System / Steering wheel / Heated Steering wheel Repair procedures

Inpection
1.
Measure a resistance of NTC and Heated pad.
A.
NTC resistance(Black / Yellow, Black) - 10.0 k? ± 10% (25°C)
B.
Heated pad resistance (Yellow, Black) - 1.6 ~ 2.0 ? ± 10%
2.
Measure a temperature.
A.
The temperature of wheel surface grip must rise from -20°C to 20°C within 6 minute
B.
The temperature of wheel surface grip must keep 38°C ± 4°C after 25 minute
C.
At that time switch on, all measure point (1~8)

Heated Steering wheel Schematic Diagrams
System Circuit Diagram Terminal Function HousingPinFunctionWire colorPadAGNDBackBHEATERYellowCNTC+Back / YellowDNTC-BackRemotecontrolAGNDBackBBATRedCLEDGreenDSWITCHWhite ...

Electric Power Steering
...

See also:

Evaporator Temperature Sensor Description and Operation
Description The evaporator temperature sensor will detect the evaporator core temperature and interrupt compressor relay power in order to prevent evaporator freezing by excessive cooling. ...

Variable Intake Solenoid (VIS) Valve Schematic Diagrams
Circuit Diagram ...

Line Pressure Control Solenoid Valve Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the ...

Categories

Hyundai Azera Manuals


© 2011-2025 Copyright www.hgmanual.com