The grip is heated as painting heat paint on steering grip for driver convenience for winter



Specifications
Item
| Specification
|
Voltage
| 13.5 V
|
Heated pad resistance
| 1.6 ~ 2.0 ? ± 10%
|
NTC resistance
| 10.0 k? ± 10% (25°C)
|
Current
| 124A not over
|
Removal
1.
Disconnect the battery negative cable from the battery and then wait for at least 30 seconds.
2.
Turn the steering wheel so that the front wheels can face straight ahead.
3.
R ...
System Circuit Diagram
Terminal Function
HousingPinFunctionWire colorPadAGNDBackBHEATERYellowCNTC+Back / YellowDNTC-BackRemotecontrolAGNDBackBBATRedCLEDGreenDSWITCHWhite
...
See also:
Specifications
Specifications
ItemSpecificationFront/Rear parking assist system control unitRated voltageDC 12VOperation range30~120 cm(11.8~47.2 in)Operation voltageDC 9V~16VOperation currentMax. 300 mAOperati ...
Battery
...
Oil Filter Body Repair procedures
Removal and Installation
1.
Remove the water pipe.
(Refer to Cooling System - "Water Pipe")
2.
Wait for 5 minutes after loosening the oil filter cap to drain well the oil in the oil filter.
...