Specification |
Temperature | Resistance (k?) | |
°C | °F | |
-40 | -40 | 52.15 |
-20 | -4 | 16.52 |
0 | 32 | 6.0 |
20 | 68 | 2.45 |
40 | 104 | 1.11 |
60 | 140 | 0.54 |
80 | 176 | 0.29 |
Line Pressure Control Solenoid Valve Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the solenoid valve connector.
3.
Measure resistance between sensor signal terminal and sensor ground terminal.
4.
Check that the ...
Front Rear Parking Assist System Switch Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel in the driver side.
(Refer to Body - "Crash Pad Lower Panel")
3.
Disconnect the connector and ...
Operation of the rear parking assist system
Operating condition
This system will activate when backing up with the ignition switch ON.
The sensing distance while the rear parking assist system is in operation
is approximately 47 in. (12 ...