Hyundai Azera: Engine Electrical System

Main Muffler Repair procedures

Removal and Installation 1. Disconnect the battery negative terminal. (Refer to Engine Electrical System - "Battery") 2. Remove the main muffler (A). Tightening torque: 39.2 ~ 58.8 N.m ( ...

General Information

...

See also:

GAWR (Gross axle weight rating)
This is the maximum allowable weight that can be carried by a single axle (front or rear). These numbers are shown on the certification label. The total load on each axle must never exceed its GAWR. ...

Crankshaft Damper Pulley Repair procedures
Removal and Installation     • Use fender covers to avoid damaging painted surfaces. • To avoid damage, unplug the wiring connectors carefully while holding the connecto ...

Body Control Module (BCM) Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") 3. Remove the Reinforcing panel after loosening the ...