Hyundai Azera: Oil Pressure Switch Components and Components Location

Oil Pump Repair procedures

Removal 1. Remove the lower oil pan. (Refer to Lubrication System - "Oil Pan") 2. Remove the oil pump chain cover (A). Tightening torque : 9.8 ~ 11.8N.m (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft) ...

Oil Pressure Switch Repair procedures

Removal and Installation 1. Remove the water pipe. (Refer to Cooling System - "Water Pipe") 2. Remove the oil pressure switch (A). Tightening torque: 34.3 ~ 44.1N.m (3.5 ~ 4.5kgf.m, 25.3 ...

See also:

Special Service Tools
Special Service Tools Tool (Number and Name)IllustrationUse09546-26000Strut spring compressorCompression of coli spring ...

Rear Combination Lamp Repair procedures
Rear Combination Lamp (Outside) 1. Disconnect the negative (-) battery terminal. 2. If the bulbs should be only replaced without removing lamp assembly, replace the turn signal lamp bulb (A). ...

Erasing HomeLink® buttons
Individual buttons cannot be erased. However, to erase all three programmed buttons: 1. Press and hold the two outer HomeLink® buttons until the indicator light begins to flash after 10 seconds. 2. ...