Removal and Installation |
1. |
Remove the battery and tray.
|
2. |
Remove the air duct and air cleaner assembly.
(Refer to Intake And Exhaust System - "Air Cleaner") |
3. |
Drain the coolant.
(Refer to Cooling System - "Coolant") |
4. |
Loosen the upper hose clip fixing bolt (A), and then remove the radiator upper hose (B) and lower hose (C).
|
5. |
Installation is reverse order of removal |
In-car sensor Repair procedures
Inspection
1.
Ignition "ON"
2.
Blow warm air into the in-car sensor air inlet. Measure sensor resistance between 2 and 4 terminals.
1. Incar Motor(-)2. Sensor GND3. -4. Incar Sensor (+)5. - ...
Power Seat Control Switch Schematic Diagrams
Circuit Diagram
...
Smart key unit Repair procedures
Removal
-
Take care not to scratch the crash pad and related parts
Smart key unit
1.
Disconnect the negative (-) battery terminal.
2.
Remove the accelerator pedal ...