Hyundai Equus Manuals

Hyundai Azera: Engine Hanger Repair procedures - Engine And Transmission Assembly - Engine Mechanical System - Hyundai Azera 2011-2025 Service ManualHyundai Azera: Engine Hanger Repair procedures

Removal and Installation
[Front engine hanger]
1.
Remove the front engine hanger (A)

Tightening torque:
44.1 ~ 53.6N.m (4.5 ~ 5.5kgf.m, 32.5 ~ 39.8lb-ft)

2.
Install in the reverse order of removal.
[Rear engine hanger]
1.
Remove the rear engine hanger (A)

Tightening torque:
18.6 ~ 23.5N.m (1.9 ~ 2.4kgf.m, 13.7 ~ 17.4lb-ft)

2.
Install in the reverse order of removal.
Engine Hanger Components and Components Location
Components Location ...

Timing System
...

See also:

Torque Converter Control Solenoid Valve (T/CON_VFS) Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the ...

Brake fluid
Check brake fluid level in the brake fluid reservoir. The level should be between “MIN” and “MAX” marks on the side of the reservoir. Use only hydraulic brake fluid conforming to DOT 3 or DOT 4 spec ...

Injector Drive Box (IDB) Repair procedures
Removal 1. Turn the ignition switch off and disconnect the battery negative (-) cable. 2. Disconnect the injector drive box (IDB) connector (A). 3. Remove the air cleaner assembly. (Refer ...

Categories

Hyundai Azera Manuals


© 2011-2025 Copyright www.hgmanual.com