Do not park your vehicle in a damp, poorly ventilated garage. This creates a favorable environment for corrosion.
This is particularly true if you wash your vehicle in the garage or drive it into the garage when it is still wet or covered with snow, ice or mud. Even a heated garage can contribute to corrosion unless it is well ventilated so moisture is dispersed.
Parking Brake Pedal Assembly Repair procedures
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash pad lower panel")
3.
Remove the junction b ...
Specifications
Specifications
ItemSpecificationMaster cylinder
•
Type
•
I.D. mm(in)
•
Piston stroke mm(in)
•
Fluid level switch
?Fixed type 23.81 mm (0.937 in)45 ± 1 mm (1.77 ± 0.039 ...
35R Clutch Control Solenoid Valve(35R/C_VFS) Schematic Diagrams
Circuit Diagram
...