Under some conditions your parking brake can freeze in the engaged position. This is most likely to happen when there is an accumulation of snow or ice around or near the rear brakes or if the brakes are wet. If there is a risk the parking brake may freeze, apply it only temporarily while you put the shift lever in P (Park) and block the rear wheels so the vehicle cannot roll. Then release the parking brake.
SRS Control Module (SRSCM) Repair procedures
Removal
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least three minutes before beginning work.
3.
Remove the floor console.
(Ref ...
Fuel Pressure Control Valve (FPCV) Troubleshooting
Signal Waveform
...
Instrument Cluster Description and Operation
Description
System block diagram
High speed CAN communication : C-CAN
1.
User option : Seat Easy Access, Welcome Light, etc
2.
SPAS: Smart Parking Aid System
3.
EPB : Electronic Parking ...