Replacement |
1. |
Disconnect the damper (B) from the glove box (A) and then remove the glove box lift (C). |
2. |
Remove the filter cover(A) with pushing the knob. |
3. |
Replace the air filter (B), install it after making sure of the direction of air filter. |
4. |
Installation is the reverse order of removal.
|
Photo Sensor Description and Operation
Description
1.
The photo sensor is located at the center of defrost nozzle.
2.
The photo sensor contains a photovoltaic (sensitive to
sunlight) diode. The solar radiation received by its lig ...
Output Speed Sensor Specifications
Specifications
? Type: Hall effect sensor
Operation condition [°C(°F)](-40~150) -40~302Air gap(mm)in.(0.8~1.25) 0.032~0.049Output voltageHigh1.18~1.68Low0.59~0.84
...
Blower Unit Repair procedures
Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the heater and blower unit.
(Refer to Heater - "Heater Unit")
3.
Remove the blower unit (A) from the heater unit ...