Hyundai Azera: Ambient Sensor Description and Operation
Fifth generation HG (2011–2025) / Hyundai Azera 2011-2025 Service Manual / Heating,Ventilation, Air Conditioning / Air Conditioning System / Ambient Sensor Description and Operation
| Description |
| 1. |
The ambient temperature sensor is located at the front of the
condenser and detects ambient air temperature. It is a negative type
thermistor resistance will increase with lower temperature, and decrease
with higher temperatures. |
| 2. |
The sensor output will be used for discharge temperature
control, temperature regulation door control, blower motor level
control, mix mode control and in-car humidity control.
|
Photo Sensor Repair procedures
Inspection
1.
Ignition "ON"
2.
Using the scan tool.
3.
Emit intensive light toward photo sensor using a lamp, and check the output voltage change.
4.
The voltage will rise with higher ...
Ambient Sensor Repair procedures
Inspection
1.
Ignition "OFF"
2.
Disconnect ambient temperature sensor.
3.
Check the resistance of ambient temperature sensor between
terminals 1 and 2 whether it is changed by changing ...
See also:
Accelerator Position Sensor (APS) Description and Operation
Description
Accelerator Position Sensor (APS) is installed on the
accelerator pedal module and detects the rotation angle of the
accelerator pedal. The APS is one of the most important sensors ...
Line Pressure Control Solenoid Valve Specifications
Specifications
Direct control VFS[LINE Pressure]
? Control type : Normal low type
Control Pressure [kpa (kgf/cm?, psi)]500.14 ~ 9.81(5.1~ 0.1, 72.54 ~ 1.42)Current value(mA)50 ~ 850 Inter ...
Smart key precautions
If you lose your smart key, you will not be able to start the engine. Tow
the vehicle, if necessary, and contact an authorized HYUNDAI dealer.
A maximum of 2 smart keys can be registered to a s ...
Categories
Hyundai Azera Manuals
