Hyundai Equus Manuals

Hyundai Azera: Rheostat Repair procedures - Lighting System - Body Electrical System - Hyundai Azera 2011-2025 Service ManualHyundai Azera: Rheostat Repair procedures

Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the passenger compartment juction box cover.
3.
Remove the crash pad side switch assembly (A) by pushing it through juction box cover hole.
   
Put on gloves to protect your hands.

4.
Side crash pad switch connector

No.
Description
1
ILL+
2
ILL-
3
VDC
4
CTM(ECS)
5
AVM(PAS)
6
ACM indicator(PAS indicator)
7
IGN
8
Ground
9
ECO
10
ECO indicator
11
Rheostat down
12
Rheostat up
13
 -
14
 -
15
 -
16
 -

5.
Operate the rheostat switch and check for continuity between terminals.

Hazard Lamp Switch Repair procedures
Removal 1. Disconnect the negative(-) battery terminal. 2. Remove the center console upper assembly (A) with hazard lamp switch.     Apply the protective tapes to the center ...

Front Fog Lamps Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the front bumper. (Refer to Body - "Front Bumper Cover") 3. Disconnect the front fog lamp connector. 4. Replace the ...

See also:

Features of your vehicle
Satellite radio reception You may experience difficulties in receiving XM™ satellite radio signals in the following situations. If you are driving in a tunnel or a covered parking area. If y ...

Tire replacement
If the tire is worn evenly, a tread wear indicator will appear as a solid band across the tread. This shows there is less than 1/16 inch (1.6 mm) of tread left on the tire. Replace the tire when t ...

Input Speed Sensor Specifications
Specifications ? Type: Hall effect sensor Operation condition [°C(°F)](-40~150) -40~302Air gap(mm)in.(0.95~1.65)0.037~0.065Output voltage(V)High1.18~1.68Low0.59~0.84 ...

Categories

Hyundai Azera Manuals


© 2011-2025 Copyright www.hgmanual.com