Inspection |
1. |
Open the fuel filler door and remove the fuel filler door release actuator (A) after loosening the mounting bolts. |
2. |
Remove the luggage side trim [LH].
|
3. |
Disconnect the release actuator connector (A). |
4. |
Check for continuity between terminal No.1 and No.2.
If there is no continuity, replace the fuel filler door opener. |
Engine Hanger Repair procedures
Removal and Installation
[Front engine hanger]
1.
Remove the front engine hanger (A)
Tightening torque:
44.1 ~ 53.6N.m (4.5 ~ 5.5kgf.m, 32.5 ~ 39.8lb-ft)
2.
Install in the reverse ord ...
Rear Hub - Carrier Components and Components Location
Components
1. Parking Brake Assembly2. Rear Carrier Assembly3. Rear Hub Assembly4. Rear Brake Disc
...
Switching to Radio Mode
Pressing the key will change the
operating mode in order of FM1 ➟ FM2 ➟ AM ➟ XM1 ➟ XM2 ➟ XM3.
If [Mode Pop up] is turned on within
[Display], then pressing ...