Hyundai Azera: Front Seat Belt

Rear Back Armrest Cup Holder Repair procedures

Replacement     • Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface. • Take care not to bend or scratch the trim and ...

Components and Components Location

Components 1. Front seat belt pretensioner2. Height adjuster3. Rear seat belt [RH]4. Rear seat belt [Center]5. Rear seat belt [LH]6. Rear seat belt buckle [LH] ...

See also:

Checking the brake fluid level
Check the fluid level in the reservoir periodically. The fluid level should be between MAX (Maximum) and MIN (Minimum) marks on the side of the reservoir. Before removing the reservoir cap and addin ...

Trunk Lid Latch Repair procedures
Replacement     • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • ...

Rear Wheel Speed Sensor Repair procedures
Removal 1. Remove the rear wheel and tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) 2. Remove the rear wheel speed sensor mounting bolt (A). Tightenin ...