Hyundai Azera: Front Pillar Trim Repair procedures

Fifth generation HG (2011–2025) / Hyundai Azera 2011-2025 Service Manual / Body (Interior and Exterior) / Interior Trim / Front Pillar Trim Repair procedures

Replacement

•	Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.

•	Take care not to bend or scratch the trim and panels.

•	Put on gloves to protect your hands.

1.	Using a screwdriver or remover, remove the front pillar trim (A).

2.

Installation is the reverse of removal.

•	Replace any damaged clips.

Front Pillar Trim Components and Components Location

Component Location 1. Front pillar trim ...

Center Pillar Trim Components and Components Location

Component Location 1. Center pillar lower trim2. Center pillar upper trim ...

See also:

Crash Pad Side Cover Repair procedures
Replacement • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • Take ...

Tire and loading information label
The label located on the driver's door sill gives the original tire size, cold tire pressures recommended for your vehicle, the number of people that can be in your vehicle and vehicle capacity ...

Compressor Oil Repair procedures
Oil Specification 1. The HFC-134a system requires synthetic (PAG) compressor oil whereas the R-12 system requires mineral compressor oil. The two oils must never be mixed. 2. Compressor (P ...

Categories

Hyundai Azera Manuals

© 2011-2025 Copyright www.hgmanual.com