Hyundai Equus Manuals

Hyundai Azera: Front Lower Arm Repair procedures - Front Suspension System - Suspension System - Hyundai Azera 2011-2024 Service ManualHyundai Azera: Front Lower Arm Repair procedures

Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Suspension System / Front Suspension System / Front Lower Arm Repair procedures

Replacement
1.
Remove the front wheel & tire (A).
Tightening torque:
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)

   
Be careful not to damage to the hub bolts when removing the front wheel & tire.
2.
Loosen the bolt & nut and then remove the lower arm (A).
Tightening torque:
98.1~117.7N.m (10.0~12.0kgf.m, 72.3 ~ 86.6lb-ft)

3.
Loosen the bolts & nuts. and than Remove the front lower arm (A).
Tightening torque
Front :
117.7~137.3N.m(12.0~14.0Kgf.m, 86.8~101.3lb-ft)
Rear :
156.9~176.5N.m(16.0~18.0Kgf.m, 115.7~130.2-ft)

4.
Installation is the reverse of removal.
Inspection
1.
Check the bushing for wear and deterioration.
2.
Check the lower arm for deformation.
3.
Check the all bolts and nuts.
4.
Check the ball joint dust cover for crack
Front Strut Assembly Repair procedures
Replacement 1. Remove the front wheel & tire (A). Tightening torque: 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)     Be careful not to damage to the hub bolts ...

Front Stabilizer Bar Repair procedures
Replacement 1. Remove the front wheel & tire (A). Tightening torque: 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)     • Be careful not to damage to the hub b ...

See also:

Interior Body Repair
Interior A Front pillar trim mounting hole (O8.5) Curtain airbag mounting hole (O6.6) Cowl crossbar mounting hole (O9) Front door checker mounting hole (O13)Cowl side trim mounting hole (6.5X18) ...

Vehicle certification label
The vehicle certification label attached on the driver’s (or front passenger’s) side center pillar gives the vehicle identification number (VIN). ...

Underdrive Brake Control Solenoid Valve(UD/B_VFS) Specifications
Specifications Direct control VFS[UD/B] ? Control type : Normal low type Control Pressure [kpa (kgf/cm?, psi)] 500.14 ~ 9.81(5.1 ~ 0.1, 72.54 ~ 1.42)Current value(mA)50~850 Internal resis ...

Categories

Hyundai Azera Manuals


© 2011-2024 Copyright www.hgmanual.com