Components |
1. Coking nut 2. Brake disc 3. Hub 4. Dust cover | 5. Knuckle 6. Wheel bearing 7. Snap ring 8. Drive shaft |
Rear Seat Assembly Repair procedures
Replacement
1.
After loosening the mounting bolts, then remove the rear seat cushion assembly (A).
Tightening torque :
16.7 ~ 25.5N.m (1.7 ~ 2.6kgf.m, 12.3~18.8lb-ft)
2.
Disconnect the r ...
Line Pressure Control Solenoid Valve Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the solenoid valve connector.
3.
Measure resistance between sensor signal terminal and sensor ground terminal.
4.
Check that the ...
Description and Operation
Cruise Control
The cruise control system is engaged by the cruise "ON/OFF"
main switch located on right of steering wheel column. The system has
the capability to cruise, coast, accelerate and ...