Hyundai Azera: Crash Pad Side Cover Repair procedures

Fifth generation HG (2011–2025) / Hyundai Azera 2011-2025 Service Manual / Body (Interior and Exterior) / Crash Pad / Crash Pad Side Cover Repair procedures

Replacement

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Take care not to scratch the body surface.

•	Put on gloves to protect your hands.

1.	Using a screwdriver or remover, remove the crash pad side cover (A). [LH] [RH]

2.

Installation is the reverse of removal.

•	Replace any damaged clips.

Crash Pad Side Cover Components and Components Location

Component Location [LH] 1. Crash pad side cover [LH] [RH] 1. Crash pad side cover [RH] ...

Main Crash Pad Assembly Components and Components Location

Component Location 1. Main crash pad assembly ...

See also:

Torque Converter Control Solenoid Valve (T/CON_VFS) Specifications
Specifications Direct control VFS[T/CON] ? Control type : Normal low type Control Pressure [kpa (kgf/cm?, psi)] 9.81~ 500.14 (0.1~ 5.1, 1.42 ~ 72.54)Current value(mA)50 ~ 850 Internal res ...

Trunk Lid Weatherstrip Repair procedures
Replacement 1. Remove the trunk lid weatherstrip (A). • Do not apply sealant to the body. 2. Installation is the reverse of removal. • ...

Hazard warning flasher
The hazard warning flasher should be used whenever you find it necessary to stop the car in a hazardous location. When you must make such an emergency stop, always pull off the road as far as poss ...

Categories

Hyundai Azera Manuals

© 2011-2025 Copyright www.hgmanual.com