Hyundai Azera: Camshaft Components and Components Location

CVVT Assembly Repair procedures

Removal 1. Remove the timing chain. (Refer to Timing System - "Timing Chain") 2. Remove the CVVT assembly. A. A: LH exhaust CVVT B. B: LH intake CVVT C. C: RH intake CVVT D. D: ...

Camshaft Repair procedures

Removal [RH] 1. Remove the RH bank timing chain. (Refer to Timing System - "Timing Chain") 2. Remove the RH exhaust CVVT oil control valve. (Refer to Fuel System - "CVVT Oil Control Valv ...

See also:

35R Clutch Control Solenoid Valve(35R/C_VFS) Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the ...

ICM (Integrated Circuit Module) Relay Box Repair procedures
Inspection Two Turn Unlock Relay Check for continuity between the terminals. 1. There should be continuity between the No.18 and No.17 terminals when power and ground are connected to the No. ...

Output Speed Sensor Description and Operation
Description The output speed sensor is a vital unit that measures the rate of rotation of the transaxle's turbine shaft and output shaft, and delivers the readings to the Transaxle Control Modu ...