Tilt and telescopic steering allows you to adjust the steering wheel before you drive.You can also raise it to give your legs more room when you exit and enter the vehicle.
The steering wheel should be positioned so that it is comfortable for you to drive, while permitting you to see the instrument panel warning lights and gauges.
WARNING
- Steering wheel adjustment Never adjust the angle and height of the steering wheel while driving. You may lose steering control and cause serious personal injury, death, or accidents.
Manual type
To change the steering wheel angle and height:
1. Pull down the lock-release lever (1).
2. Adjust the steering wheel to the desired angle (2) and height (3).
3. Pull up the lock-release lever to lock the steering wheel in place.
Electric type
To change the steering wheel angle and height:
Knock Sensor (KS) Repair procedures
Removal
[Knock Sensor #1 (Bank 1)]
1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Disconnect the knock sensor connector (A).
3.
Remove the intake man ...
Smart Cruise Control Unit Repair procedures
Removal
1.
Remove the bumper.
(Refer to Body - "Front Bumper Cover")
2.
Loosen the bolts and nuts and then remove the smart cruise control unit assembly (A) from the vehicle.
3.
Disconn ...
SS-A Solenoid Valve(ON/OFF) Description and Operation
Description
SS-A solenoid valve is attached to the valve body and is an
on/off solenoid valve that is used to change gears. SS-A Solenoid
valve(ON/OFF) is installed at valve body. ...