Hyundai Azera: Suspension mounting bolts
Check the suspension connections for looseness or damage. Retighten to the specified torque.
Brake discs, pads, calipers and rotors
Steering gear box, linkage & boots/lower arm ball jointReservoir Tank Repair procedures
Removal and Installation
1.
Disconnect the over flow hose (A), and then remove the resorvior tank (B).
Tightening torque:
3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)
2.
Installation ...
Temperature Control Actuator Repair procedures
Inspection
1.
Ignition "OFF"
2.
Disconnect the connector of temperature control actuator.
3.
Verify that the temperature control actuator operates to the
hot position when connecting 12 ...
ICM (Integrated Circuit Module) Relay Box Repair procedures
Inspection
Two Turn Unlock Relay
Check for continuity between the terminals.
1.
There should be continuity between the No.18 and No.17
terminals when power and ground are connected to the No. ...