Hyundai Azera: Rear Cross Member Repair procedures
Fifth generation HG (2011–2025) / Hyundai Azera 2011-2025 Service Manual / Suspension System / Rear Suspension System / Rear Cross Member Repair procedures
Fifth generation HG (2011–2025) / Hyundai Azera 2011-2025 Service Manual / Suspension System / Rear Suspension System / Rear Cross Member Repair procedures
| Replacement |
| 1. |
Remove the rear wheel & tire (A).
|
| 2. |
Remove the rear shock absorber.
(Refer to Rear Suspension System - "Rear Shock Absorber") |
| 3. |
Remove the rear upper arm.
(Refer to Rear Suspension System - "Rear Upper Arm") |
| 4. |
Remove the rear assist arm.
(Refer to Rear Suspension System - "Rear Assist Arm") |
| 5. |
Remove the rear lower arm.
(Refer to Rear Suspension System - "Rear Lower Arm") |
| 6. |
Remove the trailing arm.
(Refer to Rear Suspension System - "Rear Trailing Arm") |
| 7. |
Remove the main muffler.
|
| 8. |
Loosen the mounting bolts and then remove the rear sub frame (A) with the frame.
|
| 9. |
Installation is the reverse of removal. |
| 10. |
Chek the alignment.
(Refer to Tires/Wheels - "Alignment") |
Trailing Arm Repair procedures
Replacement
1.
Remove the rear wheel & tire.
Tightening torque:
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
•
Be careful not to damage to the hub bolts ...
Tires/Wheels
...
See also:
Lane Departure Warning System (LDWS) Unit Components and Components Location
Components
...
Fluid Repair procedures
Service Adjustment Procedure
Oil level Check
A check of Automatic Transaxle Fluid(ATF) level is not
normally required during scheduled services. If an oil leak is found, ...
Intake Air Temperature Sensor (IATS) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the IATS connector.
3.
Measure resistance between the IATS terminals 3 and 4.
4.
Check that the resistance is within the speci ...
Categories
Hyundai Azera Manuals
© 2011-2025 Copyright www.hgmanual.com