Hyundai Azera: In-car sensor Description and Operation
Fifth generation HG (2011–2025) / Hyundai Azera 2011-2025 Service Manual / Heating,Ventilation, Air Conditioning / Air Conditioning System / In-car sensor Description and Operation
Fifth generation HG (2011–2025) / Hyundai Azera 2011-2025 Service Manual / Heating,Ventilation, Air Conditioning / Air Conditioning System / In-car sensor Description and Operation
| Description |
| 1. |
In-car air temperature sensor is located at the lower crash pad. |
| 2. |
The sensor contains a thermistor which measures the
temperature of the cabin. The signal, determined by the resistance value
which changes in accordance with perceived cabin temperature, is
delivered to heater control unit and according to this signal the
control unit regulates in-car temperature to intended value. |
Evaporator Temperature Sensor Repair procedures
Inspection
1.
Ignition "OFF".
2.
Disconnect evaporator temperature sensor.
3.
Using the multi-tester, Measure resistance between terminal "1" and "2" of evaporator temperature sensor.
Spe ...
In-car sensor Repair procedures
Inspection
1.
Ignition "ON"
2.
Blow warm air into the in-car sensor air inlet. Measure sensor resistance between 2 and 4 terminals.
1. Incar Motor(-)2. Sensor GND3. -4. Incar Sensor (+)5. - ...
See also:
Purge Control Solenoid Valve (PCSV) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the PCSV connector.
3.
Measure resistance between the PCSV terminals 1 and 2.
4.
Check that the resistance is within the speci ...
Components and Components Location
Component Location
1. Rear curtain2. Rear curtain switch (Floor console upper cover)
...
Fuel Line Repair procedures
Removal
In case of removing the high pressure fuel pump, high
pressure fuel pipe, delivery pipe, and injector, there may be injury
caused by leakage of the high pressure f ...
Categories
Hyundai Azera Manuals
© 2011-2025 Copyright www.hgmanual.com