Hyundai Azera: Hood Insulator Pad Repair procedures

Hood Assembly Repair procedures

Replacement     • When removing and installing the hood, an assistant is necessary. • Be careful not to damage the hood and body. • When removing the clips, use a c ...

Hood Lift Repair procedures

Replacement 1. Using a screwdriver (A), lift the socket clips (B) up slightly on both ends of the lifter (C), and then remove the lifter from the bracket (D). 2. Installation is the revers ...

See also:

Brake Line Repair procedures
Removal 1. Disconnect the brake fiuid level switch connector, and remove the reservoir cap. 2. Remove the brake fluid from the master cylinder reservior with a syringe.     ...

Rear Wheel Speed Sensor Repair procedures
Removal 1. Remove the rear wheel and tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) 2. Remove the rear wheel speed sensor mounting bolt (A). Tightenin ...

Output Speed Sensor Specifications
Specifications ? Type: Hall effect sensor Operation condition [°C(°F)](-40~150) -40~302Air gap(mm)in.(0.8~1.25) 0.032~0.049Output voltageHigh1.18~1.68Low0.59~0.84 ...