Hyundai Azera: Side Impact Sensor (SIS) Components and Components Location

Side Impact Sensor (SIS) Description and Operation

Description Side Impact Sensor (SIS) system consists of two Pressure Side Impact Sensor (P-SIS) which are installed at each center of the front door module (LH and RH) and two SIS which are ins ...

Side Impact Sensor (SIS) Repair procedures

Removal Front Side Impact Sensor 1. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 2. Remove the door scuff trim. (Refer to Body - "Door sc ...

See also:

Hazard warning flasher
The hazard warning flasher should be used whenever you find it necessary to stop the car in a hazardous location. When you must make such an emergency stop, always pull off the road as far as poss ...

Rear Back Armrest Repair procedures
Replacement     • Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface. • Take care not to bend or scratch the trim and pan ...

TPMS Sensor Repair procedures
Removal 1. Remove the tire. (Refer to Tires/Wheels - "Tire") 2. Remove the valve nut.     The valve nut should not be re-used. Installation Sensor Fit   & ...