Hyundai Azera: Front Driveshaft Components and Components Location
Fifth generation HG (2011–2025) / Hyundai Azera 2011-2025 Service Manual / Driveshaft and axle / Driveshaft Assembly / Front Driveshaft Components and Components Location
Fifth generation HG (2011–2025) / Hyundai Azera 2011-2025 Service Manual / Driveshaft and axle / Driveshaft Assembly / Front Driveshaft Components and Components Location
| Component Location |
| 1. Driveshaft(LH) 2. Inner shaft bearing bracket assembly | 3. Driveshaft(RH) |
| Components |
| 1. BJ Assembly 2. Clip 3. BJ Boot Band 4. BJ Boot | 5. Dynamic Damper Band 6. Dynamic Damper 7. Shaft 8. TJ Boot Band | 9. TJ Boot 10. Spider Assembly 11. Clip 12. TJ Case | 13.Clip |
| 1. BJ Assembly 2. Clip 3. BJ Boot Band 4. BJ Boot | 5. Shaft 6. TJ Boot Band 7. TJ Boot 8. Spider Assembly | 9. Clip 10. TJ Case 11. Dynamic Damper Band 12. Dynamic Damper |
Front Driveshaft Repair procedures
Replacement
1.
Loosen the wheel lug nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the front wheel and tire (A) from front hub.
Tightening torque:
88. ...
See also:
Repair procedures
Teaching Procedures
1.
Key Teaching Procedure
Key teaching must be done after replacing a defective PCM(ECM) or when providing additional keys to the vehicle owner.
The procedure starts with a ...
Canister Close Valve (CCV) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the CCV connector.
3.
Measure resistance between the CCV terminal 1 and 2.
4.
Check that the resistance is within the specific ...
Normal maintenance schedule
The following maintenance services must be performed to ensure good emission
control and performance. Keep receipts for all vehicle emission services to protect
your warranty. Where both mileage and ...
Categories
Hyundai Azera Manuals
© 2011-2025 Copyright www.hgmanual.com