Hyundai Azera: Torque Converter Control Solenoid Valve (T/CON_VFS) Schematic Diagrams

Torque Converter Control Solenoid Valve (T/CON_VFS) Specifications

Specifications Direct control VFS[T/CON] ? Control type : Normal low type Control Pressure [kpa (kgf/cm?, psi)] 9.81~ 500.14 (0.1~ 5.1, 1.42 ~ 72.54)Current value(mA)50 ~ 850 Internal res ...

Torque Converter Control Solenoid Valve (T/CON_VFS) Repair procedures

Inspection 1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the ...

See also:

Rear Seat Assembly Repair procedures
Replacement 1. After loosening the mounting bolts, then remove the rear seat cushion assembly (A). Tightening torque : 16.7 ~ 25.5N.m (1.7 ~ 2.6kgf.m, 12.3~18.8lb-ft) 2. Disconnect the r ...

Fuel Pump Repair procedures
Inspection [Fuel pump] 1. Turn the ignition switch OFF, and then remove battery (-) cable. 2. Remove the fuel pump assembly. 3. Check motor operation by fuel pump connector (A) connecti ...

Passive Occupant Detection System (PODS-F) Description and Operation
Description In order to make normal activation of airbag system, SRSCM detects DTC(s) for the Passive occupant detection system (PODS-F). If the seat is occupied, PODS-F detects passenger prese ...