System Block Diagram |
Component part | Function |
Vehicle-speed sensor | Converts vehicle speed to pulse. |
ECM | Receives signals from sensor and control switches. |
Cruise control indicator | Illuminate when CRUISE main switch is ON (Built into cluster) |
Cruise Control switches | ON/OFF switch | Switch for automatic speed control power supply. |
Resume/Accel switch | Controls automatic speed control functions by Resume/Accel switch (Set/Coast switch) |
Set/Coast switch | |
Cancel switches | Cancel switch | Sends cancel signals to ECM. |
Brake-pedal switch | |
Transaxle range switch (A/T) | |
ETS motor | Regulates the throttle valve to the set opening by ECM. |
Shift Lever Repair procedures
Removal
1.
Remove the center console assembly.
(Refer to Body - "Console")
2.
Remove the duct (A).
3.
Disconnect sports mode connector (A).
4.
Remove the shift cable (B).
5.
Remo ...
Rear Door Inside Handle Repair procedures
Replacement
1.
Remove the rear door trim.
(Refer to Rear Door - "Rear Door Trim")
2.
After loosening the mounting screws, then remove the rear door inside handle (A).
3.
Installation is t ...
A/V external amplifier Components and Components Location
Components
Pin No.Pin nameFunctionPower [W]A1Battery +power input10AA2Battery +power input10AA3Battery +power input10AA4-no connect?A5CAN +CAN +20mAA6CAN -CAN -20mAA7ACCACC/IGN input(on/off)10mAA ...