Hyundai Azera: Drive shafts and boots
Fifth generation HG (2011–2025) / Hyundai Azera 2011-2025 Owners Manual / Maintenance / Explanation of scheduled maintenance items / Drive shafts and boots
Check the drive shafts, boots and clamps for cracks, deterioration, or damage. Replace any damaged parts and, if necessary, repack the grease.
Exhaust pipe and muffler
Visually inspect the exhaust pipes, muffler and hangers for cracks, deterioration,
or damage. Start the engine and listen carefully for any exhaust gas leakage. Tighten
connections or replace parts ...
Air conditioning refrigerant
Check the air conditioning lines and connections for leakage and damage. ...
See also:
A/C Pressure Transducer Description and Operation
Description
A/C pressure transducer convert the pressure value of high
pressure line into voltage value after measure it. By converted voltage
value, engine ECU controls cooling fan by operatin ...
Repair procedures
Compression Pressure Inspection
If the there is lack of power, excessive oil consumption or poor fuel economy, measure the compression pressure.
1.
Warm up engine until th ...
BJ Boot Repair procedures
Replacement
1.
Remove the front driveshaft.
(Refer to Driveshaft Assembly - “Front Driveshaft”)
2.
Remove the TJ joint assembly.
(Refer to Driveshaft Assembly - “TJ Joint”)
3.
Remove ...
Categories
Hyundai Azera Manuals
