Hyundai Azera: Specifications
| Specification |
Air Conditioner
| Item | Specification | |
| Compressor | Type | 6VSX16 |
| Oil type & Capacity | FD46XG(PAG OIL) 100±10cc | |
| Pulley type | 6PK-TYPE | |
| Displacement | 160cc/rev | |
| Condenser | Heat rejection | 14,400 ±5% kcal/hr |
| A/C Pressure transducer | The method to measure the pressure | Voltage= 0.00878835 * Pressure (psig) + 0.5 |
| Expansion valve | Type | Block type |
| Refrigerant | Type | R-134a |
| Capacity [oz.(g)] | 19.4 ± 0.88 oz. (550 ± 25g) | |
Blower Unit
| Item | Specification | |
| Fresh and recirculation | Operating method | Actuator |
| Blower | Type | Sirocco |
| Speed step | Auto + 8 speed (Automatic) | |
| Speed control | Power mosfet (Auto) | |
| Air filter | Type | Particle filter |
Heater And Evaporator Unit
| Item | Specification | |
| Heater | Type | Pin & Tube type |
| Heating capacity | 4,850 - 5% kcal/hr | |
| Mode operating method | Actuator | |
| Temperature operating method | Actuator | |
| Evaporator | Temperature control type | Evaporator temperature sensor |
| A/C ON/OFF [°C(°F)] | ON : 3.0 ± 0.5 (39.4 ± 32.9), OFF: 0 ± 0.5 (32.0 ± 32.9) | |
Tightening torques
| Part tightened | N.m | Kgf.m | lbf-ft |
| Condenser - Discharge hose | 7.8 ~ 11.8 | 0.8 ~ 1.2 | 5.8 ~ 8.7 |
| Condenser - Liquid tube | |||
| Compressor | 20.0 ~ 32.9 | 2.04 ~ 3.36 | 14.7 ~ 24.3 |
| Compressor - Suction hose | 7.8 ~ 11.8 | 0.8 ~ 1.2 | 5.8 ~ 8.7 |
| Compressor - Discharge hose | |||
| Expansion valve - Evaporator | 8.8 ~ 13.7 | 0.9 ~ 1.4 | 6.5 ~ 10.1 |
Special Service Tools
Special Service Tools
Tool (Number and name)IllustrationUse09977-29000Disc & hub assembly bolt removerRemoval and installation of limiter assembly.
...
See also:
Panoramaroof Deflector Repair procedures
Replacement
1.
Open the movable glass fully.
2.
Remove the panoramaroof deflector mounting bracket (A) as arrow.
3.
After loosening the mounting screws, then remove the panoramaroof deflec ...
Reservoir Tank Repair procedures
Removal and Installation
1.
Disconnect the over flow hose (A), and then remove the resorvior tank (B).
Tightening torque:
3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)
2.
Installation ...
Engine Cover Repair procedures
Removal and Installation
1.
Remove the engine cover (A).
•
Lift up the lower end of engine cover, then left and right alternately.
•
When installing, confirm that t ...
Categories
Hyundai Azera Manuals
© 2011-2024 Copyright www.hgmanual.com