Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the LDWS unit cover (A). |
3. |
Disconnect the LDWS unit connector (A). |
4. |
Remove the LDWS unit after disengaging the mounting bracket (A). |
Installation |
1. |
Align LDWS unit with windshield bracket using forward edge point (A). |
2. |
Engage snaps and pivot upward to lock point (B).
|
3. |
Connect the LDWS unit connector. |
4. |
Connect the negative (-) battery terminal. |
Oil Filter Repair procedures
Replacement
1.
Remove the engine cover.
2.
Wait for 5 minutes after loosening the oil filter cap to drain well the oil in the oil filter.
3.
Replace the oil filter.
(1)
Disconnect the ...
Photo Sensor Repair procedures
Inspection
1.
Ignition "ON"
2.
Using the scan tool.
3.
Emit intensive light toward photo sensor using a lamp, and check the output voltage change.
4.
The voltage will rise with higher ...
Side Impact Sensor (SIS) Repair procedures
Removal
Front Side Impact Sensor
1.
Disconnect the battery negative cable and wait for at least three minutes before beginning work.
2.
Remove the door scuff trim.
(Refer to Body - "Door sc ...