Fog lights are used to provide improved visibility and avoid accidents when visibility is poor due to fog, rain or snow etc.
The fog lights will turn on when :
1. The headlight is turned on.
2. The fog light switch is turned to the ON position.
To turn off the fog lights, turn the fog light switch (1) to the OFF position or turn off the head lights.
When in operation, the fog lights consume large amounts of vehicle electrical power. Only use the fog lights when visibility is poor.
Barometric Pressure Sensor (BPS) Description and Operation
Description
Barometric Pressure Sensor (BPS) is a speed-density type
sensor and is installed on the air cleaner assemby. It senses absolute
pressure of the air cleaner assemby and transfers the ...
Rear Console Cover Components and Components Location
Component Location
1. Rear console cover
...
Front Hub - Axle Repair procedures
Replacement
1.
Loosen the wheel lug nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the front wheel and tire(A) from front hub.
Tightening torque:
88.2 ...