Inspection |
1. |
The body control module can diagnose by using the GDS more quickly.
The BCM communicates with the GDS and then reads the input/output value and drives the actuator. |
2. |
To diagnose the SWRC function, select the menu of model and body control module |
3. |
To consult the present input/output value of SWRC, "Current DATA". |
Removal |
1. |
Remove the driver airbag module.
|
2. |
Remove the steering wheel.
|
3. |
Remove the steering wheel cover (A) after loosening the screws. |
4. |
Remove the steering wheel remote control switch connector (A).
[LH - AVN/Handsfree] [RH - Cruise] |
5. |
Remove the steering wheel remote control switch (A) after loosening the mounting screws. |
Installation |
1. |
Reassemble the steering wheel remote control switch. |
2. |
Reassemble the steering wheel cover. |
3. |
Reassemble the steering wheel. |
4. |
Reassemble the steering wheel remote control switch and airbag connector.
|
5. |
Reassemble the driver airbag module. |
Rear Package Tray Trim Repair procedures
Replacement
•
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
•
Take care not to bend or scratch the trim and pan ...
Windshield defrosting and defogging
WARNING - Windshield heating
Do not use the or
position during cooling operation
in extremely humid weather. The difference between the temperature of the outside
air and that of t ...
Heated Oxygen Sensor (HO2S) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the HO2S connector.
3.
Measure resistance between the HO2S terminals 3 and 4.
4.
Check that the resistance is within the speci ...