Removal |
1. |
Remove the center fascia tray.
|
2. |
Disconnect the connectors (A) from center fascia tray. |
3. |
Remove the multimedia jack (B) from the console upper cover after releasing the fixed hooks (A). |
Installation |
1. |
Install the multimedia jack. |
2. |
Install the floor console upper cover. |
3. |
Install the shift lever knob.
|
Driver position memory system (If equipped)
A driver position memory system is provided to store and recall the driver’s
seat, outside rearview mirror and steering wheel position or the instrument panel
illumination intensity with a simpl ...
Certification label
The certification label is located on the driver's door sill at the center pillar.
This label shows the maximum allowable weight of the fully loaded vehicle.
This is called the GVWR (Gross V ...
Lane Departure Warning System (LDWS) Unit Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the LDWS unit cover (A).
3.
Disconnect the LDWS unit connector (A).
4.
Remove the LDWS unit after disengaging the mou ...