Replacement |
1. |
Remove the front seat assembly.
(Refer to Front Seat - "Front Seat Assembly") |
2. |
Disconnect the connector mounting clip (A). |
3. |
After loosening the mounting bolt, then remove the front seat belt buckle (A).
|
4. |
Installation is the reverse of removal. |
Starter Components and Components Location
Component
1 . Front housing2. Planet gear shaft assembly3 . Lever4 . Lever packing5 . Starter solenoid assembly6 . Packing7 . Planet gear 8 . Shield9 . Armature assembly10 . York assembly11 . Br ...
Line Pressure Control Solenoid Valve Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the solenoid valve connector.
3.
Measure resistance between sensor signal terminal and sensor ground terminal.
4.
Check that the ...
Push-starting
Vehicles equipped with automatic transaxle cannot be push-started. Follow the
directions in this section for jump-starting.
WARNING - Tow starting vehicle
Never tow a vehicle to start it beca ...