Hyundai Equus Manuals

Hyundai Azera: Height Adjust Repair procedures - Front Seat Belt - Body (Interior and Exterior) - Hyundai Azera 2011-2025 Service ManualHyundai Azera: Height Adjust Repair procedures

Replacement
1.
Remove the front seat belt upper anchor.
(Refer to Front Seat Belt - "Front Seat Belt Pretensioner")
2.
After loosening the bolts, then remove the height adjustor (A).

Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5kgf.m, 28.9 ~ 39.8 lb-ft)

3.
Installation is the reverse of removal.
   
Replace any damaged clips.
Make sure the connector is plugged in properly.
Height Adjust Components and Components Location
Component Location 1. Height adjust ...

Front Seat Belt Buckle Components and Components Location
Component Location 1. Front seat belt buckle ...

See also:

Shift Cable Components and Components Location
Components 1. Shift lever knob2. Shift lever assembly 3. Control cable assembly4. Manual control lever (T/M side) ...

Limitation of Active ECO operation:
If the following conditions occur while Active ECO is operating, the system operation is limited even though there is no change in the ECO indicator. When the coolant temperature is low: The syst ...

Shift Cable Repair procedures
Removal 1. Remove the center console assembly. (Refer to Body - "Console") 2. Remove the duct (A). 3. Remove the control cable (B). 4. Remove the control cable assembly in the vehicle ...

Categories

Hyundai Azera Manuals


© 2011-2025 Copyright www.hgmanual.com