Hyundai Azera: Rear Seat Assembly Components and Components Location

Components and Components Location

Components Rear Seat Back [RH] 1. Headrest2. Headrest guide3. Rear seat back pad4. Rear seat back cover5. Rear seat back pad support wire6. Rear back armrest7. Hinge bracket cover8. Rear seat ...

Rear Seat Assembly Repair procedures

Replacement 1. After loosening the mounting bolts, then remove the rear seat cushion assembly (A). Tightening torque : 16.7 ~ 25.5N.m (1.7 ~ 2.6kgf.m, 12.3~18.8lb-ft) 2. Disconnect the r ...

See also:

Side Impact Sensor (SIS) Description and Operation
Description Side Impact Sensor (SIS) system consists of two Pressure Side Impact Sensor (P-SIS) which are installed at each center of the front door module (LH and RH) and two SIS which are ins ...

Parking Assist Sensor Repair procedures
Removal [Front parking assist sensor] 1. Remove the front bumper. (Refer to Body - "Front Bumper Cover") 2. Pull out the front sensor (A) from the sensor holder by opening the sensor holder ...

Line Pressure Control Solenoid Valve Specifications
Specifications Direct control VFS[LINE Pressure] ? Control type : Normal low type Control Pressure [kpa (kgf/cm?, psi)]500.14 ~ 9.81(5.1~ 0.1, 72.54 ~ 1.42)Current value(mA)50 ~ 850 Inter ...