Hyundai Azera: Front Seat Shield Outer Cover Repair procedures

Fifth generation HG (2011–2025) / Hyundai Azera 2011-2025 Service Manual / Body (Interior and Exterior) / Front Seat / Front Seat Shield Outer Cover Repair procedures

Replacement

•	Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.

•	Take care not to bend or scratch the trim and panels.

•	Put on gloves to protect your hands.

1.	Using a screwdriver or remover, remove the front seat shield outer cover (A).

2.	Disconnect the connector (A).

3.

Installation is the reverse of removal.

•	Replace any damaged clips.

•	Make sure the connector is plugged in properly.

Front Seat Shield Outer Cover Components and Components Location

Component Location 1. Front seat shield outer cover ...

Front Seat Shield Inner Cover Components and Components Location

Component Location 1. Front seat shield inner cover ...

See also:

Components and Components Location
Components 1. LDWS ON/OFF switch2. Instrument cluster3. LDWS unit ...

Brake discs, pads, calipers and rotors
Check the pads for excessive wear, discs for run out and wear, and calipers for fluid leakage. ...

Vehicle break-in process
No special break-in period is needed. By following a few simple precautions for the first 600 miles (1,000 km) you may add to the performance, economy and life of your vehicle. Do not race the e ...

Categories

Hyundai Azera Manuals

© 2011-2025 Copyright www.hgmanual.com