Hyundai Azera: Rear Door Outside Handle Repair procedures

Fifth generation HG (2011–2025) / Hyundai Azera 2011-2025 Service Manual / Body (Interior and Exterior) / Rear Door / Rear Door Outside Handle Repair procedures

Replacement

1.	Remove the rear door trim. (Refer to Rear Door - "Rear Door Trim")

2.	Remove the hole plug (B).

3.

After loosening the mounting bolt, then remove the rear door outside handle cover (A).

Tightening torque :

0.7 ~ 0.5 N.m (0.07 ~ 0.1 kgf.m, 1.0 ~ 0.7 lb-ft)

4.	Remove the rear door outside handle (A) by sliding it rearward.

5.

Installation is the reverse of removal.

•	Make sure the door locks/unlocks and opens/closes properly.

•	Make sure the door locks and opens properly.

Rear Door Outside Handle Components and Components Location

Component Location 1. Rear door outside handle ...

Rear Door Latch Components and Components Location

Component Location 1. Rear door latch ...

See also:

Variable Intake Solenoid (VIS) Valve Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the VIS valve connector. 3. Measure resistance between the VIS valve terminals 1 and 2. 4. Check that the resistance is within ...

Trunk Lamps Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the luggage room lamp (B) when prying the clip (A) with a flat-up screwdriver. 3. Remove the luggage room lamp bulb in ca ...

GVW (Gross vehicle weight)
This is the Base Curb Weight plus actual Cargo Weight plus passengers. ...

Categories

Hyundai Azera Manuals

© 2011-2025 Copyright www.hgmanual.com